How to Replace Your Pool Filter Pressure Gauge

I show how I replace the pool filter pressure gauge. It’s easy. Here is a link to buy this pressure gauge: https://amzn.to/2PsYNVC

#poolmaintenance #pool #poolseason #poolcleaning

How to Replace Your Pool Filter Pressure Gauge
Step 1
The first step is to turn off the pool pump to stop the flow of water through the pool cartridge filter.
Step 2
Next you will have to relieve the pressure that has built up in the pool filter. To relieve pressure turn the air relief valve on top of the filter counter-clockwise. Water will spray out initially as you see the pressure on the pool filter pressure gauge go to 0 psi.
Step 3
Twist the base of the pool filter pressure gauge counterclockwise to remove the gauge from the top of the pool filter head. You may have to use an open-end wrench to loosen the gauge. If you twist too hard from the top of the pressure valve, you may break the valve.
Step 4
Wrap the threads of the pressure gauge with 3 layers of plumbers Teflon tape. Wind the tape CLOCKWISE as you face the open end of the fitting, beginning at the end of the fitting. DO NOT use Plumber’s Pipe Dope.
Step 5
Hand tighten and then turn the base of the gauge 1/4 turn with an open end wrench. DO NOT over tighten.
Step 6
Turn on power to the pool pump to repressurize the pool filter.
Step 7
The air relief valve should still be open. As the pressure builds, air will be released through the relief valve. When water starts to spray out of the valve, turn the valve clockwise to close it.
Step 8
Check the pressure gauge. It typically reads between 10 – 20 psi but this will vary according to the make of pool cartridge filter or its age.

How To: Replace a Hayward DE Filter Pressure Gauge
how,to,Hayward,Diatomaceous Earth (Rock Type),Gauge,Pressure Gauge,Inyo Pools,Swimming,Pool,Repair,Maintainence,swimming pool air leak,swimming pool repair,swimming pool maintenance,swimming pool care,swimming pool clean,swimming pool filter,swimming pool pump pressure

Replace Pool Sand Filter Pressure Gauge & Clean Sight Glass. DIY
Replace pool filter pressure gauge,clean sight glass pool sand filter,diy,hoe to,broken sight glass,broken pressure gage for pool sand filter

Pool Filter Pressure Gauge Replacement
swimming,pool,filter,gauge,pool filter pressure guage,pool equipment repair,pool pressure gauge,pool filter pressure gauge,pool filter pressure,pressure gauge,pool filter

Replace Pool Sand Filter Pressure Gauge & Clean Sight Glass. DIY
Replace pool filter pressure gauge,clean sight glass pool sand filter,diy,hoe to,broken sight glass,broken pressure gage for pool sand filter

Pool Filter PSI: High and Low Filter Pressure – Causes and Cures
Pool Filter PSI,What is PSI?,Why is my pool filter pressure high?,Why is my pool filter’s pressure low?,High pool filter pressure,How to lower down my pool’s filter pressure,High pool filter PSI,What does PSI in my pool filter mean?,Poor pool circulation.

When It’s Time to Replace the Pressure Gauge on your Swimming Pool Filter!
swimming pools,pressure gauge,gauge,swimming,pool,above ground pools,in ground pools,pool filter,pools,diy,hallmark pool supplies

Swimming Pool Pressure Gauge Not Working, Replacing It And Cleaning Swimming Pool.
pool pressure gauge not wokring,too high,replacement,swimming,backwash,vacuum,cleaning,gauge at 0,install steps,easy,steps

Pressure gauge replacement
Pentair,swimming pool repair,how to

As an Amazon Associate I earn from qualifying purchases at no cost to you.

Awesome Addition to Your Trailer Jack

This awesome addition to your trailer jack makes lowering and lifting your jacks so much easier! You can get this here: https://amzn.to/2PCugo2

#rvhack #trailerhack #trailer #rvlife #trailerupgrade #rvupgrade

You will flip out on how cool this is.

Foot FLIPs up as jack is retracted, making storage simple and convenient
Eliminates the need for blocks of wood
6″ Extension minimizes amount of cranking required to position jack
1,400 lbs. max tongue weight
Extremely fast and easy installation
Country of origin : United States
Package Dimensions : 11.25″ L x 6.25″ W x 5.5″ H
Package weight : 6 pounds
Model number : 88-00-6500
Fastway Flip 88-00-6500 Trailer Tongue Automatic Fold-Up Jack Foot Plate–6 Inch Extension (2-Inch Inner Jack Tube), 2 1/4 Inch
The Fastway FLIP jack foot extends your trailer jack by six inches, and saves you 50 cranks both up and down. The FLIP has two times more contact surface area than other jack feet, providing more stability for your trailer.

The FLIP installs in seconds, with no tools needed for most applications, and fits nearly every 2-1/4″ tongue jack- round or square.

The FLIP eliminates the need to search for rocks or wood blocks to put under your trailer jack. It is the only jack foot that is completely automatic; the FLIP extends down and locks into place when jack is extended, then tucks up under the trailer frame when towing. It easily removes for low clearance situations, and fits virtually every bumper-pull trailer: horse, travel, cargo, RV, ATV, and flat bed.

As you extend your jack, the FLIP jack foot extends down, and locks into place. When you raise your jack, the FLIP jack foot automatically tucks up under the frame and out of the way.
There are two FLIP size options:

1. 6″ FLIP jack foot to fit a 2-1/4″ jack
2. 4″ FLIP jack foot to fit a 2-1/4″ jack

Save time and effort every time you tow your trailer.

Saves up to 100 trailer jack cranks every hook up

Extends your tongue jack by 6 inches

Fastest, easiest automatic jack foot

Easily removes for low clearance situations

No drilling, measuring, or tools needed for most applications

Fits virtually every bumper-pull trailer: horse, travel, cargo, ATV, and flat bed

The Fastway® FLIP™ jack foot extends your trailer jack by six inches, eliminating up to 50 cranks both up and down, saving you time and effort. It is the only jack foot that is completely automatic and eliminates the need to search for rocks or wood blocks to put under your trailer jack.

The FLIP installs in seconds, with no tools needed for most applications, and fits nearly every 2-1/4″ tongue jack – round or square.

Fastway FLIP 88-00-6500 Trailer Tongue Automatic Fold-Up Jack Foot Plate for 2 1/4″ Jacks-6″ Extension (2-Inch Inner Jack Tube)
Fastway FLIP 88-00-4500 Trailer Tongue Automatic Fold-Up Jack Foot Plate for 2 1/4″ Jacks–4″ extension (2-Inch inner Jack Tube)
Foot flips up as jack is retracted, making storage simple and convenient
Eliminates the need for blocks of wood
4″ Extension minimizes amount of cranking required to position jack
1,600 lbs. max tongue weight
Extremely fast and easy installation

For 2-1/4 inch jacks – 4 inch extension The new Fastway( Flip automatic jack foot gets rid of the hassle of placing blocks under your tongue jack. Bolts quickly and easily to your existing jack, giving you an automatic 4″ extension that locks into place when extended, and folds up out of the way when retracted! Fits most any 2-1/4″ jack with 2″ inner jack tube; round or square. Maximum 1,400 lb. tongue weight. Max 3,500 lb. lift weight. Includes 4″ automatic extension and all mounting hardware.

As an Amazon Associate I earn from qualifying purchases at no cost to you.

How many rats can you kill with 4 C batteries?

#pestcontrol, #rats, #killrats, #rattrap, #diy
Electric Rat Trap: https://amzn.to/2H4KSB2
Batteries: https://amzn.to/3nZBcZ1
I try to find out how many rats I can kill with this electric rat trap using the same set of C batteries.

From Victor:
This powerful device works by delivering a humane, high-voltage shock to effectively eliminate rat invaders. For your convenience, it’s also easy to use. Just add batteries and power it on! To empty, remove the lid and empty the rodent into the trash.

Keywords and Phrases:
how to trap rats, how to, rat control, how to get rid of rats, rat traps, how to use rat traps, pest control

Easy Way to Fill Your Tractor Tires with Water

#tractorhacks, #tractorcounterweight, #tractorballast, #farmtractors, #tractors
Just a video to show how easy it is to fill your tractor tires with water. It does not take long and the tools to do it are pretty cheap.

Water Hose Adapter: https://amzn.to/36XxBVo
Valve Stem Tool: https://amzn.to/3jKPqdU

Other terms and ways to describe the instructions:
Fluid Filling your tractor Tires, Simple and Cheap (no pump required)
Get More Grip out of your Tractor Tires!
How to easily put Water in your Tractor Tire
Filling your Tractor Tires with fluid FAST with no special tools or pumps
Can you use water to fill up tractor tires? Adding ballast to your tractor tires.
The Process of Adding Fluid to your tractor Tires

Victor Electronic Rat Trap Review

#rats, #rattrap, #getridofrats, #mice, #mouse
I purchased and reviewed this electric rat trap available here: https://amzn.to/3cHDLdk

Basically this electrocutes the rat or mouse that enters the trap.

There is also a 2 pack available here: https://amzn.to/3ijtsNP

More info from the manufacturer:
Kills up to 50 rats per set of Fully charged batteries
No see, no touch Experience
High voltage shock kills rodent
Removable kill chamber for Easy baiting and cleaning
Better plate access makes cleaning Simpler

Victor Electronic Rat Trap
The Victor Electronic Rat Trap is the ultimate in rodent control. It works by delivering a humane, high-voltage shock to effectively kill the invading rat. This powerful device is capable of killing up to 50 rats per set of fully charged batteries (4 C), making it a great value when you’re dealing with a sizable infestation. It’s also easy to use! Get started by simply applying a high protein bait in the provided bait cup, place the trap in a location with high rodent activity and turn it on.

The trap is equipped with advanced smart circuit technology, which senses when a rat enters the tunnel, triggering the system to deliver a humane, high-voltage shock once the rat steps on the electrified plate.

For your convenience, the trap’s design allows you to easily dispose of the dead rodent without having to see or touch it. The new and improved design of the electronic trap has a removable kill chamber, which provides better plate access so you can easily clean and bait it in between uses.

Details
High voltage shock kills rodents efficiently
Easy-to-use: Bait, Place, Turn On, Empty
Kills one rat per setting
Lasts up to 50 rats per set of batteries
For indoor use only
Use with caution around pets and children
Light indicates kill or low battery
Requires 4 “C” batteries (Not included)

Highlights: Type: Electronic Battery Type: 4 C High voltage shock kills rats and mice in seconds Easy to use; bait, Repel-pesticides place against a wall and turn on Auto reset occurs allows trap to always be ready to kill Patented design prevents escapes Smart circuit technology senses rodent to trigger electronic shock Non-toxic, Repel-pesticides poison free Blinking green light indicates rodent has been killed Blinking red light indicates low battery Easy removal Rodents can be dumped directly into the trash for no touch, no view mouse control Requires 4 “C” batteries (Not Included) Kills 50 rats per each set of 4C batteries

Ruger SR22 High Capacity 15+1 Round Magazine

#gunreview, #rugersr22, #highcapacitymags, #22plinkster
In this video I show you the Wingman magazine extender for the stock Ruger SR22 10 round magazine. I bought it here: https://www.tandemkross.com/Wingman-5-Magazine-Bumper-for-SR22-2-PACK_p_112.html

Get 50% more rounds in your Ruger SR22 stock magazines and make them 15+1 capable.

You can find more Ruger SR22 parts here: https://amzn.to/3b0uxIs

MODEL NUMBER: 3600 CALIBER: 22 LR
Capacity10+1
Slide MaterialAluminum
Barrel Length3.50″
Grip FrameBlack Polymer
Barrel TypeStandard

Slide FinishBlack Anodize
Barrel FinishStainless
Width0.97″
SightsAdjustable 3-Dot
Weight17.5 oz.

Overall Length6.40″
Height4.90″
Grooves6
Twist1:16″ RH
Available in CANo
Available in MAYes
UPC7-36676-03600-4
Suggested Retail$439.00
Light double-action and crisp single-action trigger pulls. External hammer is designed with a rounded spur for easy cocking and single-action shooting.
Polymer frame and two interchangeable rubberized grips with angled serrations allow shooters to select either a slim or wider palm swell option (no tools required).
The aerospace-grade aluminum slide has serrations on both the front and rear for better grip and slide manipulation.
The dovetailed, high-visibility, three-dot sight system has a fixed front sight and a rear sight that is both windage- and elevation-adjustable. A reversible blade allows shooters to select two white dots or a solid black blade.
The easy-to-use underside Picatinny rail features multiple cross slots for variable mounting of most popular accessories.
Inspection port allows for visual confirmation of a loaded or empty chamber.
Readily replaceable stainless steel barrel.
Ambidextrous manual thumb safety/decocking lever and magazine release.
Easy to field strip.
Also includes: two, 10-round magazines; two finger grip extension floorplates.

As an Amazon Associate I earn from qualifying purchases at no cost to you.

Easy Way to Remove a Stuck Bearing Race

#stuckbearing, #easyway, #bearinghacks
I show an easy way to remove a stuck bearing race from a shaft if you are stuck without a bearing puller or other type tools.

The bearing on my 14′ batwing shredder was worn out and needed to be replaced. I ordered the correct tapered bearing but needed to remove the old race before installing the new bearing.

This simple hack works for a lot of things that are stuck around a shaft. This little hack will get you out of a jam!

Solar Water Pump Pressure Switch Setup

#solarwaterpump, #solarpressureswitch, #solarpump, #solarpowered
Pressure Switch on Amazon: https://amzn.to/3kiBXdP
Water Hose Timer on Amazon: https://amzn.to/2Fz4YTc
I added a pressure switch to our solar water pump in the lake to manage the pump.
We don’t always need it running and this switch has worked great.

Easy Solar Powered Water Pump

#solarwaterpump, #solarpump, #offgridsolar, #cheapsolarpump
We put together an easy and simple solar powered water pump to pump water from our pond / lake up to the high parts of our property. Pump we used: https://amzn.to/3suOsHq

For less than $200 total we now get “free” water from the lake to water all our trees and plants.

Here are the specs on the pump:
Cable: 10 feet (3m)
Voltage: 12V DC – 24V DC
Amps: 4.0 Max
Flow Rate(lph/gph): 360/96 1.6 GPM (6 LPM) Max
Maximum Lift: 230 Feet (70 Meters)
Maximum Submersion: 100 Feet (30 Meters)
Material: High Strength Engineered Plastic
Inlet: 50 Mesh Stainless Steel Screen
Outlet Port: 1/2”(12.7mm) Barbed Fitting
Internal Bypass: 105-110 PSI Max(7.2-7.5BARS)
Motor: Permanent Magnet Thermally Protected
Pump Design: Positive Displacement, 3 Chamber Diaphragm Pump
Package Size: 13.97″x4.33″x5.12″ (355*130*110mm)

Replacing Hydraulic Cylinder Seals – Part 5 – Putting it all together

Now that the mess is all cleared up, I can reassemble the hydraulic cylinder and get the tractor going again. This was a long adventure, but I learned a lot along the way and discovered many tips and tricks to help on my next rebuild.

I have a thing for older tractors and will probably use these skills a lot more in the future. I hope everything I went through helped you also.

Always check for part updates when ordering seal kits and parts for your tractor. So many revisions seem to occur along the way. I blame myself for the part mix-ups, and will be more diligent in the future when doing this kind of work.