WILL IT RUN? Free Gas Hedge Trimmer | Ryobi HT26 Gas Hedge Trimmer

I got this free Ryobi HT26 Gas Hedge Trimmer from the trash in my neighborhood. Guy said it didn’t work. Is it really dead or just neglected?

I used this repair kit from Amazon in the video: https://amzn.to/3Btr1CS

#willitrun #willitstart #willitcrank #willit #ryobi #ryobitools #lawntools #trimmer #hedgetrimmer #gaspowered #repair #smallenginerepair #diy #homestead #homesteading #fixit #homeimprovement #yardwork #fixer
WILL IT RUN? Free Gas Hedge Trimmer | Ryobi HT26 Gas Hedge Trimmer

Ryobi ZRRY39500 26-cc 22-in Gas Hedge Trimmer

Ryobi HT26, hedge, trimmer, hedge trimmer, gas trimmer, gas hedge trimmer, ryobi gas trimmer, ryobi gas hedge trimmer, ht26, will it start, will it run, will it crank, will it work, ryobi hedge trimmer, ryobi, gas, hedger, free, junk, broken, won’t start, diy, repair, fix, RY39506, neglected, petrol, carburetor, tune, fuel lines, primer bulb replacement, primer bulb, old, storage, shed, garage, replace, gas tank, filter, fuel filter, outdoor power, lawn, hedges

**Note: 50:1 Gas to Oil ratio, which is 2.6oz of oil to 1 gallon of gas. Do NOT use E85 ga Factory renewed to original condition **Ryobi RY39500** 2 Cycle Gas Hedge Trimmer. This item was refurbished by the manufacturer to the original condition and is guaranteed to meet or exceed specifications and performance of a brand new unit! Clean Running 26cc 2-cycle gas engine efficiently powers the **Ryobi RY39500** 22 In. Hedge Trimmer with unique multi-position rear handle design. Delivers professional grade results in a best value design that has many step-up features which beat comparable competitive models.

Ryobi HT26 (RY39506) Hedge Trimmer

The Ryobi HT26, model number RY39500, is part of the line of hedge trimmers designed with the homeowner in mind. Featuring a 26cc 2-cycle gasoline engine, the HT26 trimmer is adjusted and set for optimal operation at the factory. As the result of normal everyday use, the trimmer may develop issues that prevent it from operating as designed. Basic troubleshooting will often help to diagnose and correct issues without the need for a potentially costly repair bill.

As an Amazon Associate I earn from qualifying purchases at no cost to you.

WILL IT START? WILL IT RUN? Rebuilding the Injector Pump – Part 3

#willitstart #willitrun #willitcrank #jcb208s #injectorpump #rebuild #overhaul
WILL IT START? WILL IT RUN? Rebuilding the Injector Pump – Part 3
I take off the injector pump on a JCB 208s that has been sitting for years. This is the part 3 video in this series. Lets see if this will fix it.

Video 1 is here: https://youtu.be/nx5HjGc3gpU
WILL IT START? WILL IT RUN? FAIL? Skid steer sitting for years

Video 2 is here: https://youtu.be/Mo_6YjGtIiU
WILL IT START? WILL IT RUN? JCB 208s Sitting For Years – Part 2

About this machine: JCB 208s 1cx Minimaster Workmaster Backhoe

Dimensions
Transport Length 11.16ft in
Transport Width 4.7ft in
Transport Height 7.42ft in
Wheelbase 3.52ft in
Ground Clearance 0.86ft in
Height To Top Of Suspended Cab 7.29ft in

Backhoe
Load Height – Std 11.29ft in
Reach From Swivel – Std 11.09ft in
Dig Depth – Std 8.37ft in
Reach At Load Height – Std 5.88ft in
Bucket Dig Force – Std 4852.38lb

Loader
Clearance At Max Dump Height 6.89ft in
Reach At Max Dump Height 0.99ft in
Dig Depth 1.97in
Lift Capacity At Full Height 5290lb
Bucket Capacity 0.3yd3
Bucket Width 56.3in
Bucket Breakout Force 5179lb

Specifications

Engine
Number Of Cylinders 4
Engine Model 404C-22
Net Power 47hp
Gross Power 50hp
Power Measured @ 2800rpm
Torque Measured @ 2000rpm
Net Max Torque 104lb ft
Aspiration Naturally aspirated
Displacement 134.3cu in

Operational
Operating Weight 2wd 6150lb
Fuel Capacity 11.9gal
Hydraulic System Fluid Capacity 11.9gal
Oil System Fluid Capacity 1.3gal
Cooling System Fluid Capacity 2.1gal
Tire Size Front – 2wd / 4wd 7 x 15
Rear Tires Size 2wd/4wd 7 x 15
Operating Voltage 12V
Alternator Supplied Amperage 50amps

Transmission
Transmission Type Hydrostatic
Number Of Forward Gears 1
Number Of Reverse Gears 1
Max Speed – Forward 7mph
Max Speed Reverse 7mph

Hydraulic
Pump Type Hydrostatic
Pump Flow Capacity 12.4gal/min
Relief Valve Pressure 3000psi

WILL IT START? WILL IT RUN? JCB 208s Sitting For Years – Part 2

#willitstart #willitrun #willitcrank #skidsteer #sittingforyears #jcb #jcb208s
Part 2 – I made a list from all the great feedback I got about the machine in the 1st video (https://youtu.be/nx5HjGc3gpU) and again will attempt to get it running after its been sitting untouched for years. Will it start? Will it run? Will it crank? Fix or Fail? I am not a mechanic, but I will try. Let me know in the comments what you think. Thanks Everyone!!!

Help me get this thing running. What should I do now?

About this machine:

Dimensions
Transport Length 11.16ft in
Transport Width 4.7ft in
Transport Height 7.42ft in
Wheelbase 3.52ft in
Ground Clearance 0.86ft in
Height To Top Of Suspended Cab 7.29ft in

Backhoe
Load Height – Std 11.29ft in
Reach From Swivel – Std 11.09ft in
Dig Depth – Std 8.37ft in
Reach At Load Height – Std 5.88ft in
Bucket Dig Force – Std 4852.38lb

Loader
Clearance At Max Dump Height 6.89ft in
Reach At Max Dump Height 0.99ft in
Dig Depth 1.97in
Lift Capacity At Full Height 5290lb
Bucket Capacity 0.3yd3
Bucket Width 56.3in
Bucket Breakout Force 5179lb

Specifications

Engine
Number Of Cylinders 4
Engine Model 404C-22
Net Power 47hp
Gross Power 50hp
Power Measured @ 2800rpm
Torque Measured @ 2000rpm
Net Max Torque 104lb ft
Aspiration Naturally aspirated
Displacement 134.3cu in

Operational
Operating Weight 2wd 6150lb
Fuel Capacity 11.9gal
Hydraulic System Fluid Capacity 11.9gal
Oil System Fluid Capacity 1.3gal
Cooling System Fluid Capacity 2.1gal
Tire Size Front – 2wd / 4wd 7 x 15
Rear Tires Size 2wd/4wd 7 x 15
Operating Voltage 12V
Alternator Supplied Amperage 50amps

Transmission
Transmission Type Hydrostatic
Number Of Forward Gears 1
Number Of Reverse Gears 1
Max Speed – Forward 7mph
Max Speed Reverse 7mph

Hydraulic
Pump Type Hydrostatic
Pump Flow Capacity 12.4gal/min
Relief Valve Pressure 3000psi

WILL IT START? WILL IT RUN? FAIL? Skid steer sitting for years

#willitstart #willitrun #willitcrank #skidsteer #sittingforyears
I will attempt to get this skid steer running after its been sitting untouched for years. Will it start? Will it run? Will it crank? I am not a mechanic, but I will try. Let me know in the comments what you think. Thanks Everyone!!!

Help me get this thing running. What should I do? Fix or Fail?

About this machine:

Dimensions
Transport Length 11.16ft in
Transport Width 4.7ft in
Transport Height 7.42ft in
Wheelbase 3.52ft in
Ground Clearance 0.86ft in
Height To Top Of Suspended Cab 7.29ft in

Backhoe
Load Height – Std 11.29ft in
Reach From Swivel – Std 11.09ft in
Dig Depth – Std 8.37ft in
Reach At Load Height – Std 5.88ft in
Bucket Dig Force – Std 4852.38lb

Loader
Clearance At Max Dump Height 6.89ft in
Reach At Max Dump Height 0.99ft in
Dig Depth 1.97in
Lift Capacity At Full Height 5290lb
Bucket Capacity 0.3yd3
Bucket Width 56.3in
Bucket Breakout Force 5179lb

Specifications

Engine
Number Of Cylinders 4
Engine Model 404C-22
Net Power 47hp
Gross Power 50hp
Power Measured @ 2800rpm
Torque Measured @ 2000rpm
Net Max Torque 104lb ft
Aspiration Naturally aspirated
Displacement 134.3cu in

Operational
Operating Weight 2wd 6150lb
Fuel Capacity 11.9gal
Hydraulic System Fluid Capacity 11.9gal
Oil System Fluid Capacity 1.3gal
Cooling System Fluid Capacity 2.1gal
Tire Size Front – 2wd / 4wd 7 x 15
Rear Tires Size 2wd/4wd 7 x 15
Operating Voltage 12V
Alternator Supplied Amperage 50amps

Transmission
Transmission Type Hydrostatic
Number Of Forward Gears 1
Number Of Reverse Gears 1
Max Speed – Forward 7mph
Max Speed Reverse 7mph

Hydraulic
Pump Type Hydrostatic
Pump Flow Capacity 12.4gal/min
Relief Valve Pressure 3000psi